Fanuc Series Oitf Plus Programming Manual

The TF Plus has a larger buffer than older models, but the manual warns against “modal insanity” (calling 10 modal commands on one line). Keep blocks clean: G01 G95 X100.0 F0.2 is perfect; adding extra G-codes is redundant per the manual.

O1234 (Program number) N10 G50 S2000 (Max spindle speed clamp) N20 G96 S200 M03 (Constant surface speed, spindle CW) N30 G00 X100. Z5. T0101 (Rapid to safe position, select tool 1 offset 1) N40 G71 U1.5 R1. (Roughing cycle – depth of cut, retract) N50 G71 P60 Q120 U0.2 W0.05 F0.25 (Profile definition start/end, finishing allowances) N60 G00 X40. (Profile path) N70 G01 Z-30. F0.15 N80 X70. Z-50. N90 Z-70. N100 G02 X90. Z-80. R10. N110 G01 Z-90. N120 X120. N130 G70 P60 Q120 (Finishing cycle) N140 G28 U0 W0 (Return to reference) N150 M30 fanuc series oitf plus programming manual

These manuals cover the standard ISO G-code and M-code programming required to operate the control: The TF Plus has a larger buffer than